Custom Aluminum Pergolas in Jacksonville & the First Coast

Powder-coated aluminum pergola installation, built to last

We design, engineer, permit and install custom powder-coated aluminum pergolas across the Jacksonville metro — built for Florida heat, humidity and salt air, with a free in-home estimate to start.

Get my free quote(904) 529-0624
5.0★ Google · 13 reviewsLicensed & insuredDetailed design plan
Get your free estimate
In-home design & Save up to $250 today!
Powder·coated aluminum Won’t rot or rustMaintenance-free30+ year lifespanSalt-air proofFlorida wind-rated

Why Aluminum

Powder-coated Aluminum Pergolas Built for the Jacksonville Climate

A custom aluminum pergola in Jacksonville has to stand up to heat, humidity and salt air — and powder-coated aluminum is built for exactly that. We’re a local custom builder, not a kit seller: we design and install fixed-slat and open-top aluminum pergolas, attached or freestanding, sized to your yard and engineered for the First Coast.

Won’t rot or rustPowder-coat finish that holds its color
Maintenance-freeNo annual staining or sealing
Attached or freestandingFixed-slat & open-top designs
15+ colorsBlack, white, bronze & custom
30+ yrspowder-coat lifespan
1–3 daystypical install
130–150 mphengineered wind rating
Freein-home estimate

Honest comparison

Aluminum vs. wood — which lasts longer here?

Cedar and pine are good-looking, real options — and we build all three. But for a low-maintenance pergola that shrugs off Florida humidity and salt air, here’s where we usually land for First Coast homeowners.

★ Our Pick · Lowest upkeep
Powder-Coated Aluminum
For a pergola that shrugs off Florida humidity and salt air with almost no upkeep, powder-coated aluminum is the long-haul winner — 30+ years, and it never needs sealing.
✓Never needs sealing or staining
✓Won’t rot, rust or warp
✓30+ year lifespan on the First Coast
MaintenanceNone
Lifespan30+ years
Rot & rustCan’t
UpfrontFrom ~$12,500
Western Red CedarNatural wood

Rich, natural grain and warm color — the classic wood look. Re-seal every 1–2 years to protect it; lasts ~15–20 years with care.

Natural grain~15–20 yrsFrom ~$8,900
Pressure-Treated PineBudget wood

The budget-friendly path to a real wood pergola — takes stain or paint. Re-seal every 1–2 years; about a 10–15 year lifespan.

Lowest cost~10–15 yrsReal wood

Custom aluminum pergola installation

Custom aluminum pergolas, gazebos & pavilions

Pergolas

Attached & Freestanding Builds

Tie a shade structure onto the back of the house over a patio, or set a freestanding aluminum pergola out by the pool or garden. We engineer each configuration for your specific footing and wind load — attachment can change the permitting and engineering, and we handle that detail for you.

Book an estimate →
Shelters

Custom Colors & Sizes

Your aluminum pergola is built to your space, not a box-store footprint. Choose from multiple powder-coat colors — classic white, modern black, bronze and more — in the size that fits, whether that’s a tidy 10×10 or a full patio-spanning span. Every finish is confirmed on your detailed design plan.

Book an estimate →
Groundwork

Shade Slats, Screens, Lighting & Fans

Build it out the way you’ll actually use it: add fixed shade slats for cooler afternoons, privacy or screen panels, integrated LED lighting, and ceiling fans for First Coast humidity. Add-ons are designed in up front so the wiring and structure are planned, not bolted on later.

Book an estimate →
Ready when you are

Start your aluminum pergola with a free on-site estimate

We bring measurements, material options, and a detailed design plan of your build — then a free, itemized estimate with no pressure.

Licensed & insured · We pull the permit · 5.0★ on Google
Book my free estimate → (904) 529-0624

What homeowners say about our aluminum pergola

5.0 ★★★★★ · 13 Google reviewsRead all reviews on Google →
★★★★★

“The wife loves the new pergola we put in for her birthday. The team did a wonderful job – great service and price.”

RRay OlsonGoogle review
★★★★★

“Their customer service was outstanding, and the quality of work exceeded our expectations!”

MMoGoogle review
★★★★★

“Big shout out! The team was attentive to every detail – exactly what my husband and I envisioned. And it wasn’t costly whatsoever!”

NNina HollinsGoogle review
★★★★★

“Estimate, installation, and cleanup all done by Jacksonville Pergola Builders. I’d use them again – 100% recommend.”

JJessica DavisGoogle review
★★★★★

“They built a gazebo next to my garden so I could read outside in the shade – and came out the very next week. Such a good addition!”

SSophie PhillipsGoogle review
★★★★★

“Our gazebo came out better than I imagined. So much character, and the perfect shaded space. My family loves it and so do I!”

SSamantha MarshallGoogle review

Aluminum pergola configurations

Aluminum pergola styles — attached, open & roofed

Attached or freestanding, open-slatted or full-roof, flat or gable — we engineer the configuration that fits your yard, your shade, and your style.

Attached
Attached pergola sketch

Ledgered to your house on one side — a seamless extension off a back wall or patio.

Freestanding
Freestanding pergola sketch

Four posts, standing on its own anywhere in the yard — pool, garden, or dock.

Open-top
Open-top pergola sketch

Classic slatted rafters for airy, dappled shade and a breeze that moves through.

Solid roof
Solid roof pergola sketch

A closed roof for full sun-and-rain cover — pavilion-style outdoor living.

Gable
Gable pergola sketch

A peaked, pitched roof for a taller ceiling and a more architectural look.

Investment

How much does an aluminum pergola cost in Jacksonville?

From ~$5,000Most installed projects land $5,000–$20,000+ once the full build is dialed in.
Size

A 10×10 costs less than a 12×12 or a full patio-spanning span.

Configuration

Attached vs. freestanding; open-top vs. fixed-slat shade or a covered section.

Add-ons

Privacy screens, integrated lighting & ceiling fans.

Finish & color

Powder-coat color and texture options.

A custom, engineer-stamped, permitted and installed pergola is a different product from a DIY box-store kit. Your in-home estimate is free — we confirm your exact figure per address. No invented quotes.

Aluminum vs. wood pergolas

Aluminum, wood & cedar pergolas

Hover a material to explore
01 · Pressure-Treated
Southern Yellow Pine
Natural tan wood — the affordable, built-strong workhorse for Northeast Florida yards.
15–20
Years
2–3 yr
Reseal
$
Cost
See pine builds →
02 · Premium Wood
Western Red Cedar
Warm reddish grain — naturally rot- and insect-resistant for wooded & waterfront lots.
15–25
Years
2–4 yr
Seal
$$
Cost
See cedar builds →
03 · Powder-Coated
Aluminum
Maintenance-free metal — won't rot, rust, or fade. The favorite for low-maintenance & waterfront lots.
30+
Years
Rinse
Upkeep
$$$
Value
See aluminum builds →

Backyard pergola ideas

Patio, poolside & backyard pergolas

A pergola does more than shade a patio. Here's where Northeast Florida homeowners put them to work.

Poolside shade

Cool, dappled cover over the pool deck that still lets the breeze through.

Outdoor kitchen

A defined roofline over the grill, bar, or a full built-in cook space.

Lakeside & dock

Waterfront shade structures along the Intracoastal, St. Johns River & area lakes.

Waterfront

Patio dining

An outdoor dining room your family actually uses three seasons a year.

Front entry

An entry pergola or portico that lifts curb appeal and frames the door.

Spa & hot tub

A cozy, private cover that turns a hot tub into a year-round retreat.

Also: commercial & restaurant patios across Northeast Florida

Hurricane-rated pergolas

Pergola permits & Florida code, handled for you

Most permanent pergolas in Jacksonville need a Northeast Florida building permit, and attached builds need engineer-stamped drawings. Our pergola company files it all through the county's online portal — so you don't have to.

Northeast Florida
A permit is required
Most permanent pergolas need a permit through the Northeast Florida Building Division — attached ones always, freestanding ones in nearly every case. We file it through the county's online portal.
Wind zone
Coastal wind code
The First Coast runs roughly 130–150 mph design wind (ASCE 7-22) — higher the closer you sit to the ocean. Aluminum framing is engineered with rated connectors & footings for your exact address.
Attached builds
Sealed engineering
A pergola attached to your home ties into the structure — so it gets engineer-stamped drawings to pass Northeast Florida plan review.
Waterfront
Setbacks & lake rules
Property-line setbacks — and Intracoastal, river & oceanfront shoreline rules — are checked before we ever break ground.
The good part
We handle the heavy lifting.
  • Permits pulled
  • Stamped engineering
  • County plan review
  • Final inspection
Serving Jacksonville · Ponte Vedra · St. Augustine · Orange Park · Fernandina Beach
Start my permitted build →
Free estimate · we pull every permit

Pergola installation process

Your pergola installation, step by step

No surprises, no scope creep. As your pergola contractor, here's exactly what happens between your first call and the night you light it up in Jacksonville.

01
On-site estimate
A free in-home visit, about 60 minutes. We measure, photograph, and walk material + budget options with you.
Week 1
02
Detailed design plan
A detailed design plan of your build — plus a free, itemized estimate.
Week 1–2
03
Permits & engineering
We pull the permit through the online portal and provide engineer-stamped drawings to Florida code.
Week 2–5
04
Build & enjoy
Most installs take 1–3 days. We finish, pass final inspection, and hand you back the yard.
Week 5–6

Aluminum pergola FAQs

Aluminum pergola cost, durability & common questions

How much does an aluminum pergola cost in Jacksonville, and what drives the price up or down?
Our custom aluminum pergolas start around $5,000, with most installed projects falling between $5,000 and $20,000+. Price is driven by size (a 10×10 vs. a 12×12 or larger), configuration (attached vs. freestanding, open-top vs. added fixed-slat shade), add-ons like screens, lighting and fans, and your finish. We confirm your exact figure at the free in-home estimate.
Aluminum vs. wood pergola: which is better for a Florida backyard?
For most Florida backyards, aluminum is the better long-term choice. It won't rot, rust or warp, needs no annual staining or sealing, and lasts 30+ years — while cedar and pine demand regular upkeep and tend to break down faster in our heat and humidity. Wood wins on natural warmth and lower up-front cost, so it's a fair pick if you love that look and accept the maintenance.
How long does an aluminum pergola last compared to wood?
A quality powder-coated aluminum pergola lasts 30+ years, often far longer. Wood pergolas in Florida frequently need significant repair or full replacement in a fraction of that time because moisture, insects and UV break down even treated lumber and cedar. Aluminum is genuinely a build-once structure — you invest once and enjoy it for decades with almost no ongoing work.
Do aluminum pergolas rust or corrode in Florida's humid, salt-air climate?
No — aluminum doesn't rust, and our marine-grade powder-coat finish is built to resist the salt-air corrosion that affects ordinary metal near the coast. That's a major reason aluminum is so well-suited to the First Coast, from the beaches to inland Duval, St. Johns, Clay and Nassau. A simple occasional rinse keeps the finish looking new for years.
How much maintenance does a powder-coated aluminum pergola really need?
Very little — a powder-coated aluminum pergola is essentially maintenance-free. There's no annual staining, sealing or repainting like a wood structure requires. The baked-on finish holds its color and won't flake or peel, so upkeep is usually just an occasional rinse with a hose to clear off pollen, dust or salt residue. That's hundreds of dollars and many weekends you simply never spend.
Do I need a permit for an aluminum pergola in Florida, and at what size?
In most cases yes — a permanent pergola requires a permit, and attached structures almost always do. Exact size thresholds vary by county and city, so we confirm the requirement for your address. The good news: we pull the permit for you and provide engineer-stamped Florida drawings (ASCE 7-22 / FBC). If you're in an HOA, you submit the package to your board — we help you prepare the stamped drawings and specs.
Are aluminum pergolas safe in high winds and hurricanes, and what wind rating should I look for?
Yes — when properly engineered. We build from structural aluminum alloy and design every pergola to ASCE 7-22 wind loads and Florida Building Code, with drawings stamped by a Florida engineer. Rather than quote a one-size mph number, we confirm the wind rating for your specific address and lot, which is the rating that actually matters for your permit and your peace of mind.
What's the difference between an attached and a freestanding aluminum pergola, and does it affect cost or permitting?
An attached aluminum pergola connects to your home, usually over a patio, while a freestanding one stands on its own footings out in the yard or by the pool. Attached builds tie into the house structure and typically carry different engineering and permitting requirements, which can affect cost. We engineer and permit either configuration and recommend the right one for your space at the estimate.
What color, finish, and size options come with a powder-coated aluminum pergola?
You choose from multiple powder-coat colors — popular options include white, black and bronze — in a baked-on finish that holds its color and resists fading. Sizes are fully custom, built to your patio or yard rather than a fixed kit footprint, from a compact 10×10 up to a patio-spanning span. You'll see your exact color and dimensions on the detailed design plan before we build.
Is it cheaper to buy a DIY aluminum pergola kit or have a custom one professionally installed?
A DIY kit from a box store can look cheaper on the sticker, but it's a different product. A custom professionally installed pergola includes engineer-stamped Florida drawings, a pulled permit, our own install crew, full cleanup and a warranty — none of which come in a flat-pack. Kits also risk failing inspection or wind code. For a structure meant to last 30+ years through Florida storms, the custom build is the safer value.

Aluminum pergolas near you

Aluminum pergolas across the First Coast

Mandarin Ponte Vedra Beach St. Augustine Orange Park Fernandina Beach
Aluminum pergolas Wood & cedar pergolas Pavilions Gazebos Decks & patios
← All service areas
Jacksonville · Northeast Florida

Ready to design your aluminum pergola?

Free on-site estimate, plus a detailed design plan of your build. We pull the permits and engineer every build to Florida code, start to finish.

Get my free quote →☎  (904) 529-0624