Pergola Builders in Ponte Vedra Beach, FL

Q: Who issues pergola permits in Ponte Vedra Beach?

Ponte Vedra Beach is unincorporated, so your pergola permit comes from St. Johns County Building Services / Permit Center at 4040 Lewis Speedway in St. Augustine, applied through the county's WATSWebX online system — not a city building department. Jurisdiction is set by your exact street address, so we verify it per lot and pull the permit for you.

Q: What wind speed does an oceanfront Ponte Vedra Beach pergola have to be engineered for?

Ponte Vedra Beach builds to the Florida Building Code (2023) with ASCE 7-22. The oceanfront sits at the higher end of coastal wind — roughly 140–150 mph near the Atlantic, easing as you move inland toward the Intracoastal. Much of the coast is a wind-borne-debris region, so we engineer enhanced anchoring and pull the exact per-lot speed from the ASCE hazard tool by address.

Q: Is my Ponte Vedra Beach lot in a VE or AE flood zone, and does that change the pergola?

Often, yes. Oceanfront lots are typically FEMA Zone VE (wave/velocity) and sit seaward of the Coastal Construction Control Line (CCCL); marsh- and Intracoastal-adjacent lots are commonly Zone AE with a Base Flood Elevation. That drives footing depth, elevation and anchoring in sandy coastal soil. We confirm your zone and BFE per address and engineer the foundation to match.

Q: What pergola material holds up best in Ponte Vedra Beach salt air?

For oceanfront and Intracoastal lots, powder-coated aluminum is the standout — it won't rot, rust or warp in salt air and humidity and lasts 30+ years with almost no upkeep. Western red cedar gives a premium natural look with periodic sealing, and pressure-treated pine is the budget choice. We'll recommend based on how close you are to the Atlantic.

Q: Does Marsh Landing or Sawgrass require ARB approval for a pergola?

Yes — gated golf communities like Marsh Landing, Sawgrass Players Club, Sawgrass Country Club and The Plantation at Ponte Vedra run architectural review boards that approve outdoor structures. We do not submit or manage HOA/ARB approvals; you submit to your own association. What we provide is the engineer-stamped drawing set your ARB needs, and our design plan helps the package read clearly.

Q: Do I need HOA/ARB approval before the St. Johns County permit?

In most Ponte Vedra Beach communities, yes — secure your HOA or ARB approval first, then the county building permit follows. You submit to your association; we don't handle or file that for you. We give you the stamped Florida drawings and design package to support your submittal, then pull the St. Johns County permit once your community has signed off.

Q: How much does a pergola cost in Ponte Vedra Beach?

Most installed projects run $5,000–$20,000+. Pressure-treated pine starts around $4,500, western red cedar around $8,900, and powder-coated aluminum around $12,500. Coastal Ponte Vedra Beach lots can add engineering and anchoring for high wind and VE/AE flood. Your free in-home estimate gives an exact, address-specific number.

Q: Do you build pergolas across Ponte Vedra Beach and nearby St. Johns areas?

Yes. We build throughout Ponte Vedra Beach — oceanfront, Marsh Landing, Sawgrass, The Plantation and Old Ponte Vedra — plus Palm Valley, Nocatee, Fruit Cove, World Golf Village and St. Augustine across St. Johns County. After permits are approved, install is typically 1–3 days; plan roughly 3–6 weeks total, and longer if your community's ARB review is involved.

Custom pergola installation across Ponte Vedra Beach & St. Johns County

Custom pergolas, pavilions & gazebos in pressure-treated pine, western red cedar & powder-coated aluminum — built for oceanfront salt air, Marsh Landing and Sawgrass golf-community standards, and high coastal wind, and we pull the permit and engineer to Florida code.

5.0★ Google · 13 reviewsLicensed & insuredDetailed design plan

Serving Clay County Ponte Vedra BeachNocateePalm ValleySt. AugustineFruit Cove

PONTE VEDRA BEACH · ST. JOHNS COUNTY

Pergolas built for Ponte Vedra living

Ponte Vedra Beach runs from the Atlantic oceanfront through dune, marsh and the Intracoastal Waterway, taking in Marsh Landing, Sawgrass Players Club, The Plantation at Ponte Vedra and Old Ponte Vedra. A pergola turns a pool deck, lanai or summer kitchen into shaded, usable outdoor living that holds up to sun, humidity and salt. Because Ponte Vedra Beach is unincorporated, building permits run through St. Johns County Building Services. Oceanfront lots sit at the higher end of coastal wind and often in FEMA Zone VE seaward of the Coastal Construction Control Line (CCCL), while marsh- and Intracoastal-adjacent lots are commonly Zone AE — so we engineer footings and anchoring to your address.

Representative build

Cedar pergola · Ponte Vedra Beach backyard

Coastal-built: powder-coated aluminum, cedar or sealed pine specified for Ponte Vedra Beach salt air & humidity

St. Johns County permit pulled — engineer-stamped Florida drawings sized to your oceanfront, marsh or Intracoastal lot

HOA-ready drawings for Marsh Landing, Sawgrass & Plantation ARB submittals (you submit to your association; we provide the stamped set)

Custom pergola installation

Custom pergolas, gazebos & pavilions

Pergolas

Custom Pergolas

Aluminum, wood & cedar pergolas engineered for shade, comfort, and elegance — built for Florida sun and storms.

Book an estimate →

Shelters

Gazebos, Pavilions & Cabanas

Fully sheltered outdoor rooms that protect from the elements and add a striking centerpiece to your yard.

Book an estimate →

Groundwork

Decks & Patios

Custom decks and paver patios in premium materials — durable spaces perfect for relaxing or entertaining.

Book an estimate →

Ready when you are

Start your Ponte Vedra Beach pergola with a free on-site estimate

Working with our pergola company, you get measurements, material options, and a detailed design plan of your build — everything custom-built to your yard, not a big-box pergola kit — then a free, itemized estimate with no pressure.

Licensed & insured · We pull the St. Johns County permit · 5.0★ on Google

Book my free estimate → (904) 529-0624

Roofed, open & attached pergolas

Pergola styles — attached, roofed & open

Attached or freestanding, open-slatted or full-roof, flat or gable — we engineer the configuration that fits your yard, your shade, and your style.

Attached

Ledgered to your house on one side — a seamless extension off a back wall or patio.

Freestanding

Four posts, standing on its own anywhere in the yard — pool, garden, or dock.

Open-top

Classic slatted rafters for airy, dappled shade and a breeze that moves through.

Solid roof

A closed roof for full sun-and-rain cover — pavilion-style outdoor living.

Gable

A peaked, pitched roof for a taller ceiling and a more architectural look.

Aluminum & cedar pergolas

Aluminum, wood & cedar pergolas

Hover a material to explore

01 · Pressure-Treated

Southern Yellow Pine

Natural tan wood — the affordable, built-strong workhorse for St. Johns County yards.

15–20

Years

2–3 yr

Reseal

Cost

See pine builds →

02 · Premium Wood

Western Red Cedar

Warm reddish grain — naturally rot- and insect-resistant for wooded & waterfront lots.

15–25

Years

2–4 yr

Seal

Cost

See cedar builds →

03 · Powder-Coated

Aluminum

Maintenance-free metal — won’t rot, rust, or fade. The favorite for low-maintenance & waterfront lots.

30+

Years

Rinse

Upkeep

$$$

Value

See aluminum builds →

Backyard pergola ideas

Patio, poolside & backyard pergolas

A pergola does more than shade a patio. Here’s where St. Johns County homeowners put them to work.

Poolside shade

Cool, dappled cover over the pool deck that still lets the breeze through.

Outdoor kitchen

A defined roofline over the grill, bar, or a full built-in cook space.

Oceanfront, golf & marsh-side living

From a powder-coated aluminum roof over a Sawgrass-area pool deck to a cedar pavilion on a marsh-front lanai, we design and build to fit the lot. Detailed design plan lets you see the structure on your home before we build, and our own crew handles install and full cleanup.

Ponte Vedra Beach · Marsh Landing · Sawgrass · Palm Valley

Patio dining

An outdoor dining room your family actually uses three seasons a year.

Front entry

An entry pergola or portico that lifts curb appeal and frames the door.

Spa & hot tub

A cozy, private cover that turns a hot tub into a year-round retreat.

Also: commercial & restaurant patios across St. Johns County

Hurricane-rated pergolas

Pergola permits & Florida code, handled for you

Ponte Vedra Beach is unincorporated, so pergola permits run through St. Johns County Building Services / Permit Center (4040 Lewis Speedway, St. Augustine) via the county’s WATSWebX online system — not a city department. We confirm jurisdiction by your street address and handle the permit for you.

By address

A permit is required

Most permanent pergolas need a permit — through St. Johns County Building Services for unincorporated addresses, or the City of St. Augustine for in-city historic lots. We confirm the authority by your address and file it for you.

Wind zone

Coastal wind load

St. Johns is a coastal county, so design wind runs higher near the Atlantic (oceanfront Ponte Vedra & St. Augustine Beach highest) under ASCE 7-22 — confirmed per lot — with much of the area in a wind-borne-debris region. Every build gets impact-minded connectors & enhanced anchoring.

Attached builds

Sealed engineering

A pergola attached to your home ties into the structure — so it gets engineer-stamped drawings to pass County or City plan review.

Flood zones

VE/AE & setbacks

Coastal VE/AE flood zones — oceanfront, marsh, and the Tolomato, Matanzas & St. Johns rivers — add footing elevation & scour detailing, and setbacks are checked — all confirmed per address before we break ground.

The good part

We handle the heavy lifting.

Permits pulled
Stamped engineering
County plan review
Final inspection

Serving St. Johns County · Ponte Vedra Beach · Nocatee · Palm Valley

Start my permitted build →

Free estimate · we pull every permit

Pergola installation process

Your pergola installation, step by step

No surprises, no scope creep. Here’s exactly what happens between your first call and the night you light it up in Ponte Vedra Beach.

On-site estimate

A free in-home visit, about 60 minutes. We measure, photograph, and walk material + budget options with you.

Week 1

Detailed design plan

A detailed design plan of your build — plus a free, itemized estimate.

Week 1–2

Permits & engineering

We pull the St. Johns County permit through the online portal and provide engineer-stamped drawings to Florida code.

Week 2–5

Build & enjoy

Most installs take 1–3 days. We finish, pass final inspection, and hand you back the yard.

Week 5–6

Pergola builder reviews

Pergola reviews from Ponte Vedra Beach & coastal St. Johns County

Google Rating

5.0★★★★★

Based on 13 reviews

Write a review Read all reviews on Google →

Ray Olson

3 months ago

★★★★★

“The wife loves the new pergola we put in for her birthday. The team did a wonderful job – great service and price.”

2 days ago

★★★★★

“Their customer service was outstanding, and the quality of work exceeded our expectations!”

Nina Hollins

4 days ago

★★★★★

“Big shout out! The team was attentive to every detail – exactly what my husband and I envisioned. And it wasn’t costly whatsoever!”

Jessica Davis

9 months ago

★★★★★

“Estimate, installation, and cleanup all done by Jacksonville Pergola Builders. I’d use them again – 100% recommend.”

Sophie Phillips

a year ago

★★★★★

“They built a gazebo next to my garden so I could read outside in the shade – and came out the very next week. Such a good addition!”

Samantha Marshall

4 days ago

★★★★★

“Our gazebo came out better than I imagined. So much character, and the perfect shaded space. My family loves it and so do I!”

Recent reviews from our Google Business Profile · 5.0★ across 13 reviews.

Pergola cost & FAQs

Pergola cost, permits & common questions

Who issues pergola permits in Ponte Vedra Beach?

Ponte Vedra Beach is unincorporated, so your pergola permit comes from St. Johns County Building Services / Permit Center at 4040 Lewis Speedway in St. Augustine, applied through the county’s WATSWebX online system — not a city building department. Jurisdiction is set by your exact street address, so we verify it per lot and pull the permit for you.

What wind speed does an oceanfront Ponte Vedra Beach pergola have to be engineered for?

Ponte Vedra Beach builds to the Florida Building Code (2023) with ASCE 7-22. The oceanfront sits at the higher end of coastal wind — roughly 140–150 mph near the Atlantic, easing as you move inland toward the Intracoastal. Much of the coast is a wind-borne-debris region, so we engineer enhanced anchoring and pull the exact per-lot speed from the ASCE hazard tool by address.

Is my Ponte Vedra Beach lot in a VE or AE flood zone, and does that change the pergola?

Often, yes. Oceanfront lots are typically FEMA Zone VE (wave/velocity) and sit seaward of the Coastal Construction Control Line (CCCL); marsh- and Intracoastal-adjacent lots are commonly Zone AE with a Base Flood Elevation. That drives footing depth, elevation and anchoring in sandy coastal soil. We confirm your zone and BFE per address and engineer the foundation to match.

What pergola material holds up best in Ponte Vedra Beach salt air?

For oceanfront and Intracoastal lots, powder-coated aluminum is the standout — it won’t rot, rust or warp in salt air and humidity and lasts 30+ years with almost no upkeep. Western red cedar gives a premium natural look with periodic sealing, and pressure-treated pine is the budget choice. We’ll recommend based on how close you are to the Atlantic.

Does Marsh Landing or Sawgrass require ARB approval for a pergola?

Yes — gated golf communities like Marsh Landing, Sawgrass Players Club, Sawgrass Country Club and The Plantation at Ponte Vedra run architectural review boards that approve outdoor structures. We do not submit or manage HOA/ARB approvals; you submit to your own association. What we provide is the engineer-stamped drawing set your ARB needs, and our design plan helps the package read clearly.

Do I need HOA/ARB approval before the St. Johns County permit?

In most Ponte Vedra Beach communities, yes — secure your HOA or ARB approval first, then the county building permit follows. You submit to your association; we don’t handle or file that for you. We give you the stamped Florida drawings and design package to support your submittal, then pull the St. Johns County permit once your community has signed off.

How much does a pergola cost in Ponte Vedra Beach?

Most installed projects run $5,000–$20,000+. Pressure-treated pine starts around $4,500, western red cedar around $8,900, and powder-coated aluminum around $12,500. Coastal Ponte Vedra Beach lots can add engineering and anchoring for high wind and VE/AE flood. Your free in-home estimate gives an exact, address-specific number.

Do you build pergolas across Ponte Vedra Beach and nearby St. Johns areas?

Yes. We build throughout Ponte Vedra Beach — oceanfront, Marsh Landing, Sawgrass, The Plantation and Old Ponte Vedra — plus Palm Valley, Nocatee, Fruit Cove, World Golf Village and St. Augustine across St. Johns County. After permits are approved, install is typically 1–3 days; plan roughly 3–6 weeks total, and longer if your community’s ARB review is involved.

Pergola contractors near you

Pergola builders near you

Nocatee St. Augustine Fruit Cove World Golf Village

Aluminum pergolas Wood & cedar pergolas Pavilions Gazebos Decks & patios

← All service areas

Ponte Vedra Beach · St. Johns County

Ready to design your Ponte Vedra Beach pergola?

Free on-site estimate, plus a detailed design plan of your build. We pull the permits and engineer every build to Florida code, start to finish.

Get my free quote →☎ (904) 529-0624